| Power Required | 35-60 HP | Cutting Depth Per Pass | 6 in |
| Hydraulic Flow Rate | 5-13 GPM | Swing Arc | 40° |
| Rotor Size | 24 in | Cutting Direction | Horizontal and vertical |
| Carbide Steel Bolt-On Teeth | 16 (Replaceable) | 3-Point Hitch | Category 1& 2 |
| Required PTO Speed | 540 RPM | PTO Shaft | 05B-LF-1600 With Slip Clutch 63-77 in |
| Hydraulic Hose Length | 6.6 ft | Dimensions (L x W x H) | 69 x 34 x 32in |
| Hydraulic Fittings Size | G1/2 in | Finish | Powder Coat Paint Galvanized Steel |
| Cutting Height Above | 18 in | Warranty | 1 year |
| Cutting Depth Below | 12 in | Weight (N.W./G.W.) | 684/750lbs |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
