| Engine | KOHLER CH440 | Cutting Height | 15 in Above Ground |
| Certification(S) | EPA Phase III, CARB Phase III | Cutting Depth | 10 in Below Ground |
| Engine Type | Single Cylinder, 4 Stroke, Air-Cooled, OHV | Max. Stump Dia. | 32 in |
| Displacement/ HP | 429 cc; 14 HP | Rotary Chassis | Yes |
| Start | E-Start | Max. Rotation Angle | 65 Degrees |
| Battery | 12 V 20 Ah Lead-Acid | Max. Rotating Distance | 31.5 in |
| Brake | 2 x Wheel Lock | Tow Bar | Included |
| Belt | 2 x V-Belts | Coupler | 2 in Ball |
| Belts Material | Kevlar | Wheelbase | 32 in |
| Clutch | Centrifugal Clutch | Max. Speed | Off-Road Only and Max. Speed 15mph |
| Cutting Wheel Dia. | 14 in | Front Wheel | 10 in |
| Cutting Wheel Thickness | 0.47 in | Tire | 145 / 70-6 Tubeless Tyre |
| Carbide Tip Qty. | 12 Pcs | Assembled Weight | 303 lbs |
| Tip Holder Material | 42CrMo | Gross Weight | 353 lbs |
| Carbid Tip Material | YG11C Alloy | Packing Size | 45 x 30 x 29.5 in |
WARNlNG: This product can expose you to chemicals including engine exhaust (including diesel engine exhaust when equipped),lead and lead compounds, mineral oils, soots, phthalates, and carbon monoxide which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Certain specification(s) are based on engineering calculations and are not actual measurements. Specification(s) are provided for comparison purposes only and are subject to change without notice. Specification(s) for your individual equipment will vary based on normal variations in design, manufacturing, operating conditions, and other factors.
